Single Band & Longpass & Shortpass Filter Sets
中心波长/边通波长/陷波波长
- Overview
49055
ET - Wide mCherry/Texas Red for 540-580nm LEDs
Optimized for use with CoolLED light engines.
This set features a wide band excitation filter which transmits a broad range of the relatively weaker LEDs with peaks between 540-580nm, resulting in bright fluorescence signal when used with the wide emission filter in this set. Useful for fluorophores related to rhodamine, Cy3 and fluorescent proteins with similar emission spectra. This filter set may also detect Cy5/AF 647 if present.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET565/55x (EX) | $ | 365.00 | |
T600lpxr (BS) | $ | 250.00 | |
ET645/75m (EM) | $ | 365.00 |
- Overview
49056
ET - Narrow mCherry/Texas Red for 540-580nm LEDs
Optimized for use with CoolLED light engines.
This set features a wide band excitation filter which transmits a broad range of the relatively weaker LEDs with peaks between 540-580nm. Useful for fluorophores related to rhodamine, Cy3 and fluorescent proteins with similar emission spectra. This set is specifically intended to avoid detection of CY5/AF647 and similar fluors if present in the same sample.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET565/55x (EX) | $ | 365.00 | |
T600lpxr (BS) | $ | 250.00 | |
ET625/30m (EM) | $ | 365.00 |
49056
NC1280010 - ET - Narrow mCherry/Texas Red for 540-580nm LEDs
Premounted in a Leica DMi8 standard filter cube, for 25mm filters, fits 1mm-thick dichroics (91050)
Qty in Stock: 1
Optimized for use with CoolLED light engines.
This set features a wide band excitation filter which transmits a broad range of the relatively weaker LEDs with peaks between 540-580nm. Useful for fluorophores related to rhodamine, Cy3 and fluorescent proteins with similar emission spectra. This set is specifically intended to avoid detection of CY5/AF647 and similar fluors if present in the same sample.
Filters in this Set | Price | ||
---|---|---|---|
ET565/55x (EX) | $ | 365.00 | |
T600lpxr (BS) | $ | 250.00 | |
ET625/30m (EM) | $ | 365.00 | |
New Set Price | $ | 925.00 | |
New Cube Price | $ | 548.00 | |
New Set/Cube Cost | $ | 1,473.00 | |
Reclaimed Cube Cost | $ | 830.70 |
- Overview
49054
ET - GFP for 455-465nm LEDs
Optimized for use with CoolLED light engines.
This set features an excitation filter which is shifted to slightly shorter wavelengths to be most compatible with blue LEDs with peaks between 455-465nm. GFP will be brighter compared with more standard sets that transmit 470-490nm LEDs.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET460/30x (EX) | $ | 365.00 | |
T495lpxr (BS) | $ | 250.00 | |
ET520/40m (EM) | $ | 365.00 |
49054
NC1280011 - ET - GFP for 455-465nm LEDs
Premounted in a Leica DMi8 standard filter cube, for 25mm filters, fits 1mm-thick dichroics (91050)
Qty in Stock: 1
Optimized for use with CoolLED light engines.
This set features an excitation filter which is shifted to slightly shorter wavelengths to be most compatible with blue LEDs with peaks between 455-465nm. GFP will be brighter compared with more standard sets that transmit 470-490nm LEDs.
Filters in this Set | Price | ||
---|---|---|---|
ET460/30x (EX) | $ | 365.00 | |
T495lpxr (BS) | $ | 250.00 | |
ET520/40m (EM) | $ | 365.00 | |
New Set Price | $ | 925.00 | |
New Cube Price | $ | 548.00 | |
New Set/Cube Cost | $ | 1,473.00 | |
Reclaimed Cube Cost | $ | 830.70 |
49054
NC1272947 - ET - GFP for 455-465nm LEDs
Premounted in a Zeiss Axio Imager with tilted emission filter (Push & Click) (91029)
Qty in Stock: 1
Optimized for use with CoolLED light engines.
This set features an excitation filter which is shifted to slightly shorter wavelengths to be most compatible with blue LEDs with peaks between 455-465nm. GFP will be brighter compared with more standard sets that transmit 470-490nm LEDs.
Filters in this Set | Price | ||
---|---|---|---|
ET460/30x (EX) | $ | 365.00 | |
T495lpxr (BS) | $ | 250.00 | |
ET520/40m (EM) | $ | 365.00 | |
New Set Price | $ | 925.00 | |
New Cube Price | $ | 243.00 | |
New Set/Cube Cost | $ | 1,168.00 | |
Reclaimed Cube Cost | $ | 632.60 |
- Overview
49053
ET - DAPI for 355-405nm LEDs
Optimized for use with CoolLED light engines.
This set features a wide band excitation filter which is compatible with a broad range of LEDs with peaks between 355-405nm, intended for fluorophores such as DAPI. This set is intended for use with LEDs. If instead, it is used with a broad white light source such as a mercury or metal halide lamp, the excitation filter will transmit very high levels of light to the sample.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET385/70x (EX) | $ | 365.00 | |
T425lpxr (BS) | $ | 250.00 | |
ET460/40m (EM) | $ | 365.00 |
49053
NC1055157 - ET - DAPI for 355-405nm LEDs
Premounted in a Nikon filter cube for SMZ800 & SMZ1500 Stereo Microscope with 18mm filters (91019)
Qty in Stock: 1
Optimized for use with CoolLED light engines.
This set features a wide band excitation filter which is compatible with a broad range of LEDs with peaks between 355-405nm, intended for fluorophores such as DAPI. This set is intended for use with LEDs. If instead, it is used with a broad white light source such as a mercury or metal halide lamp, the excitation filter will transmit very high levels of light to the sample.
Filters in this Set | Price | ||
---|---|---|---|
ET385/70x (EX) | $ | 365.00 | |
T425lpxr (BS) | $ | 250.00 | |
ET460/40m (EM) | $ | 365.00 | |
New Set Price | $ | 925.00 | |
New Cube Price | $ | 893.00 | |
New Set/Cube Cost | $ | 1,818.00 | |
Reclaimed Cube Cost | $ | 1,200.10 |